We demonstrate a high-efficiency,high-power-nanosecond fiber laser-pumped broadband mid-infrared output based on a linearly chirped PPMgLN crystal.By using a linearly polarized pulsed Yb-doped fiber laser as the pump,we experimentally obtain a 1.22-W broadband mid-infrared laser output under pump power of 10.15 W.The 3-dB bandwidths of the idler and signal output are approxiwately 150 and 13 nm,centering at 3.60 and 1.51 μm,respectively.The measured idler spectrum shows a smooth spectral profile.
We demonstrate a compact periodically poled MgO-doped lithium niobate(MgO:PPLN)-based optical parametric oscillator(OPO) quasi-synchronously pumped by a fiber laser system with burst-mode operation.The pump source is a peak-power-selectable pulse-multiplied picosecond Yb fiber laser.The chirped pulses from a figure of eight-cavity modelocked fiber laser seed are narrowed to a duration of less than 50 ps using an FBG reflector and a circulator.The narrowed pulses are directed to pass through a pulse multiplier and to form pulse bunches,each of which is composed of 13 subpulses.The obtained pulse bunches are amplified by two-stage fiber pre-amplifiers:one-stage is core-pumped and the other is cladding-pumped.A fiberized acousto-optic modulator is inserted to control the pulse repetition rate(PRR) of the pulse bunches before they are power-amplified in the final amplifier stage with a large mode area(LMA) PM Yb-doped fiber.The maximum average powers from the final amplifier are 85 W,60 W,and 45 W,respectively,corresponding to the PRR of2.72 MHz,1.36 MHz,and 0.68 MHz.The amplified pulses are directed to pump an MgO:PPLN-based optical parametric oscillator(OPO).A maximum peak power at 3.45 μm is obtained approximately to be 8.4 kW.Detailed performance characteristics are presented.
