您的位置: 专家智库 > >

国家自然科学基金(51175514)

作品数:4 被引量:12H指数:3
相关作者:陈迎春王德国谭桂斌李庆张行更多>>
相关机构:中国石油大学(北京)广州机械科学研究院有限公司更多>>
发文基金:国家自然科学基金中央高校基本科研业务费专项资金教育部“新世纪优秀人才支持计划”更多>>
相关领域:机械工程石油与天然气工程化学工程更多>>

文献类型

  • 4篇中文期刊文章

领域

  • 3篇机械工程
  • 1篇化学工程
  • 1篇石油与天然气...

主题

  • 1篇等效刚度
  • 1篇有限元
  • 1篇软接触
  • 1篇试验机
  • 1篇铺管
  • 1篇清管
  • 1篇清管器
  • 1篇作业机器人
  • 1篇橡胶
  • 1篇立管
  • 1篇磨损
  • 1篇磨损试验机
  • 1篇摩擦磨损试验
  • 1篇摩擦磨损试验...
  • 1篇摩擦学
  • 1篇可靠性
  • 1篇机器人
  • 1篇过盈
  • 1篇过盈量
  • 1篇刚度

机构

  • 2篇中国石油大学...
  • 1篇广州机械科学...

作者

  • 1篇刘书海
  • 1篇张仕民
  • 1篇张行
  • 1篇谭桂斌
  • 1篇王德国
  • 1篇陈迎春
  • 1篇李庆

传媒

  • 2篇Scienc...
  • 1篇石油矿场机械
  • 1篇化工设备与管...

年份

  • 1篇2016
  • 1篇2015
  • 2篇2013
4 条 记 录,以下是 1-4
排序方式:
1016mm清管器密封皮碗过盈量对其刚度特性的影响被引量:2
2015年
直板型清管器是目前应用最为广泛、技术最成熟的清管器。密封皮碗作为直板清管器上的重要组件,起到建立清管器前后压差、推出管道杂物等作用。密封皮碗的过盈量直接影响密封皮碗的刚度特性。为了解1 016 mm管道清管器密封皮碗的刚度特性,以管径1 016 mm、壁厚21 mm的X70管道为研究对象,建立用于清管器密封皮碗二维轴对称有限元模型;计算分析密封皮碗在1 016 mm管径下过盈量改变的密封皮碗与管壁的接触压力、接触应力、弯曲应力、轴向弯曲距离、弯曲角度和弯曲直径的变化趋势;拟合出了以密封皮碗过盈量、厚度为参数的清管器密封皮碗等效刚度的曲线。
张行刘书海李庆张仕民
关键词:清管器有限元等效刚度
深海立管作业机器人摩擦学与可靠性研究概述被引量:3
2016年
我国管道输送安全保障特种作业机器人的研究与世界先进水平存在差距,制约了我国海洋资源勘探开发水平。从摩擦学和可靠性角度分析海洋立管作业机器人设计制造和服役的主要特点。介绍了海洋管道和立管作业机器人的主要作用。分别讨论了管道清理机器人、智能检测机器人、海管维修张紧器设备、智能式封堵机器人等服役过程的摩擦学系统和可靠性研究进展。从管道输送的流动保障、节能降耗、安全高效,及机器人安全可靠运行、检测及评定等方面进行了探讨。提出了海洋立管作业机器人的研究建议。
谭桂斌王德国陈迎春
关键词:立管机器人可靠性
Frictional behaviors of rough soft contact on wet and dry pipeline surfaces:With application to deepwater pipelaying被引量:4
2013年
Elastic rubbers are widely used in nature and engineering.In order to better understand soft rough contact under dry and wet conditions during deepwater pipelaying process,various polyurethane(PU)discs both in PU-pipe and PU-steel sliding combinations have been investigated by using self-developed tribometer.The tribological test results show that the friction coefficient can be clearly seen:PU90
TAN GuiBinWANG DeGuoLIU ShuHaiWANG HaoZHANG SiWei
关键词:铺管摩擦磨损试验机软接触
Linear polymer aqueous solutions in soft lubrication:From boundary to mixed lubrication被引量:3
2013年
In order to better understand linear polymer aqueous solutions in soft lubrication from boundary to mixed lubrication,poly(ethylene glycol) and sodium hyaluronateare used as model polymers were investigated by using UMT-2 tribometer with the ball-on-disk mode. The relationship between the master Stribeck curves of the polymer aqueous solutions and the influence factors were investigated. Experimental results indicated that soft lubrication is determined by lubricant rheological properties and surface-lubricant interactions, e.g., wetting behavior of polymer aqueous solution on tribological surfaces.
LIU ShuHaiTAN GuiBinWANG DeGuo
关键词:SOFTLUBRICATIONLINEARAQUEOUSMIXEDLUBRICATIONBOUNDARYLUBRICATION
共1页<1>
聚类工具0