The M S 6.2 Dayao,Yunnan,earthquake occurred on July 21,2003,followed by a major M S 6.1 earthquake about 88 days later in the same region.Hypocenters of the two earthquakes are almost in the same place.Based on the P wave first motion polarities of the two aftershock sequences recorded by temporary stations,we have studied the stress field in the aftershock zone and obtained the two stress field directions in Dayao region using the new version of PKU Grid Test Software provided by Chunquan Yu.Assuming that the rotation of the stress field is caused by the second main shock,we estimated the crustal stress value in the focal region by using the stress value calculation method proposed by Yongge Wan.The estimated maximum,intermediate and minimum principal stresses are 166.3 MPa,158.7 MPa and 151 MPa,respectively,before the second main shock.The normal and shear stresses projected on the fault plane of the second main shock before it occurred are 157.3 MPa,7.4 MPa,and are 158.8 MPa,0.2 MPa after it occurred,respectively.The perturbed input parameters experiments attest the stability of the solution.The result shows that the preseismic shear stress is larger than the post-seismic one,and their difference corresponds to the stress drop approximately.The estimated compressive stress level is very high,but the differential stress is low.The result is helpful for friction coefficient estimation,plate motion simulation and related studies.
The contemporary tectonic stress field in China is obtained on the basis of Chinese stress field database and Harvard CMT catalogue.Result of the inverted tectonic stresses shows that the maximum principal stress axis strikes nearly north-south direction in the west part of Tibet plateau,ENE direction in North China.In Central China,its strikes show a radiated pattern,i.e.,NNE in north part and NNW in south part.The detailed stress field parameters of nearly whole China are given and can be used in geodynamic stress field simulation and earthquake prediction.
Earthquakes are caused by the failure of faults,driven by tectonic stress build-up in the Earth’s crust.To study the earthquake preparation process and assess regional earthquake potentials,it is vitally important to understand the crustal stress evolution process and identify its change in pattern associated with the seismogenic process.In this study we investigate the focal mechanism orientations of earthquakes in southern California from 1982 to 1999,basing on a focal mechanism catalog from Hauksson.We find that for the two large earthquakes occurred in southern California,the 1992 MW7.3 Landers and the 1999 MW7.1 Hector Mine,the orientations of focal mechanisms near the coming earthquake tend to converge to the stress direction promoting the rupture of the coming earthquake and align with its focal mechanism about half-year before its occurrence,suggesting that the tectonic stress field gets more organized in favor of the rupture of the event pre-seismically. The degree of stress convergence is measured by the orientation angle RMS(root mean square)between the preshocks’focal mechanisms and the focal mechanism of the large event studied,and its time series recorded the stress convergence process. The degree of anomalies,measured by the F-tests,indicates that the convergence of stress orientations become significant at 90%confidence about half-year prior to both the Landers and Hector Mine quakes,and it becomes even more prominent at 99%confidence right before the occurrences.Our study may be of significance for assessment of regional seismic potentials.
