您的位置: 专家智库 > >

国家高技术研究发展计划(2011AA030205)

作品数:7 被引量:18H指数:3
相关作者:张雪樊仲维余锦麻云凤牛岗更多>>
相关机构:北京国科世纪激光技术有限公司中国科学院光电研究院中国科学院大学更多>>
发文基金:国家高技术研究发展计划国家自然科学基金中国科学院科研装备研制项目更多>>
相关领域:电子电信医药卫生理学机械工程更多>>

文献类型

  • 7篇中文期刊文章

领域

  • 5篇电子电信
  • 1篇机械工程
  • 1篇医药卫生
  • 1篇理学

主题

  • 6篇激光
  • 6篇激光器
  • 4篇脉冲
  • 3篇皮秒
  • 2篇陶瓷
  • 2篇陶瓷激光器
  • 2篇皮秒激光
  • 2篇皮秒脉冲
  • 2篇脉冲持续时间
  • 2篇放大器
  • 1篇导体
  • 1篇电光
  • 1篇电光开关
  • 1篇动力学参数
  • 1篇延迟发光
  • 1篇直接抽运
  • 1篇锁模
  • 1篇皮秒激光器
  • 1篇脐带
  • 1篇全固态

机构

  • 4篇北京国科世纪...
  • 3篇中国科学院光...
  • 1篇山东大学
  • 1篇中国科学院
  • 1篇中国科学院长...
  • 1篇中国科学院大...

作者

  • 3篇余锦
  • 3篇樊仲维
  • 3篇张雪
  • 3篇麻云凤
  • 2篇赵天卓
  • 2篇闫莹
  • 2篇牛岗
  • 1篇王继扬
  • 1篇魏志义
  • 1篇王庆
  • 1篇李德华
  • 1篇王兆华
  • 1篇貊泽强
  • 1篇聂树真
  • 1篇陈波
  • 1篇张治国
  • 1篇张怀金
  • 1篇杨军红
  • 1篇张晶
  • 1篇刘洋

传媒

  • 3篇中国激光
  • 2篇Chines...
  • 1篇激光与光电子...
  • 1篇Optoel...

年份

  • 1篇2014
  • 3篇2013
  • 2篇2012
  • 1篇2011
7 条 记 录,以下是 1-7
排序方式:
三波长同轴输出皮秒激光精细加工系统的研制及其应用被引量:3
2013年
为了满足不同材料的精细加工需求,采用三波长皮秒激光器作为光源,配合自行设计的光学系统和控制系统,研制了三波长同轴输出皮秒激光精细加工系统。该系统可使用任意一种、两种或三种激光波长进行同工作距加工,通过轴向色差补偿设计,实现轴向焦点补偿最大距离0.4mm,最小焦斑直径为3μm。初步探讨了该系统在微电子行业的应用,进行了铜电极板、手机屏的切割实验以及位置敏感阳极探测器图形的制作,实验证明该系统可满足多种材料的精细加工要求。
刘洋余锦张雪貊泽强聂树真黄玉涛樊仲维陈波
关键词:激光技术皮秒激光
Efficient mode-locked picosecond Yb:YAG ceramic laser被引量:3
2012年
We experimentally demonstrate a diode-pumped passively mode-locked femtosecond laser with Yb 3+ -doped yttrium lanthanum oxide ceramic. Mode-locking is achieved by using a semiconductor saturable absorber mirror, and intracavity dispersion is compensated by a pair of SF6 prisms. Laser pulses as short as 357 fs at a central wavelength of 1 075 nm are obtained. The maximum average output power is 670 mW under 4.5 W of pumping power with a slope efficiency of 20%. To the best of our knowledge, this is the shortest pulse generated from Yb-doped yttrium lanthanum oxide ceramic lasers with a sub-500 fs pulse duration.
朱江峰王兆华王庆张治国杨秋红杨军红麻云风魏志义
关键词:YB:YAG陶瓷激光器脉冲持续时间斜率效率
Diode-pumped passively mode-locked femtosecond Yb:(Y_(0.9)La_(0.1) )_2O_3 ceramic laser
2012年
We experimentally demonstrate a diode-pumped passively mode-locked femtosecond laser with Yb 3+ -doped yttrium lanthanum oxide ceramic. Mode-locking is achieved by using a semiconductor saturable absorber mirror, and intracavity dispersion is compensated by a pair of SF6 prisms. Laser pulses as short as 357 fs at a central wavelength of 1 075 nm are obtained. The maximum average output power is 670 mW under 4.5 W of pumping power with a slope efficiency of 20%. To the best of our knowledge, this is the shortest pulse generated from Yb-doped yttrium lanthanum oxide ceramic lasers with a sub-500 fs pulse duration.
朱江峰王兆华王庆张治国杨秋红杨军红麻云风魏志义
关键词:陶瓷激光器镱掺杂半导体可饱和吸收镜脉冲持续时间
二极管直接抽运Nd:LGS激光器
2013年
利用885nm激光二极管直接抽运Nd:LGS实现了1.47W的1.06μm激光输出,光-光转换效率为17.9%,斜率效率为21.4%,光束质量因子M2在x和y方向分别为1.10和1.12。实验说明了Nd:LGS是一种优质的适于直接抽运的激光晶体。
王庆魏志义王兆华李德华张治国张怀金王继扬杨军红麻云凤
关键词:激光器全固态激光器ND
Distinguish on the viability of human umbilical cord mesenchymal stem cells using delayed luminescence
2014年
In this paper, we report the discrimination of the viability of human umbilical cord mesenchymal stem cells(hUC-MSCs) with photo-induced delayed luminescence(DL). We measure the DL decay kinetics of hUC-MSCs using an ultraweak luminescence detection system, and find the significant difference in the weight distributions of the decay rate for hUC-MSCs with high and low viabilities. Spectral discrimination of hUC-MSCs with high and low viabilities is thus carried out by comparing the DL kinetics parameters, including the initial intensity, the peak decay rate and the peak weight value. Our results show that the novel optical method for the viability diagnosis of hUC-MSCs has a promising prospect.
陈平李星王岩白华林列
关键词:延迟发光脐带动力学参数超微弱发光
高重复频率25W皮秒绿光激光器被引量:9
2011年
报道了通过三级功率放大系统(LD抽运双程放大系统、LD双端抽运放大系统和LD单端抽运放大系统),获得平均功率50W以上的1064nm皮秒激光输出。当皮秒振荡器种子注入功率为6.67 W时,经过功率放大系统,最高功率达到53.7W,光-光转换效率为30.07%,皮秒脉冲宽度为10.45ps。采用非线性晶体LBO作为倍频(SHG)晶体,实现平均功率最高达27.16W,重复频率80MHz,脉冲宽度小于10ps的532nm绿光输出,SHG效率达50.58%。整体设计在实现高的SHG效率的前提下,保证不损伤SHG晶体,使系统连续稳定工作8h以上。
麻云凤余锦牛岗赵天卓闫莹张雪樊仲维
关键词:激光器功率放大器皮秒脉冲倍频
21W、56MHz Nd∶YVO_4皮秒脉冲激光放大器被引量:5
2013年
报道了通过激光二极管(LD)单端抽运Nd∶YVO4晶体的三级功率放大系统,获得稳定的平均功率21 W以上的1064nm皮秒激光输出。当重复频率为56MHz、平均功率为4 W的皮秒种子脉冲注入时,经过三级功率放大,最高功率达26W,光-光转换效率达25%。皮秒单脉冲宽度为17ps,连续1h内的功率不稳定性小于2%,光束质量M2为1.5。采用RbTiOPO4(RTP)电光开关作为打标开关,实现主从脉冲比达210…1以上,可以满足打标机的需要。
麻云凤余锦牛岗张晶赵天卓闫莹张雪樊仲维
关键词:激光器皮秒脉冲锁模皮秒激光器电光开关
共1页<1>
聚类工具0