The octahedral molecular sieve(OMS-2)-supported Fe( xFe/OMS-2: x = 1, 3, 5, and 10) catalysts were prepared using the pre-incorporation method. Physicochemical properties of the as-synthesized materials were characterized by means of various techniques, and their catalytic activities for CO, ethyl acetate, and toluene oxidation were evaluated. Among all of the samples, performed the best, with the reaction temperature required to achieve 90% conversion( T 90%) being 160 ℃ for CO oxidation, 210 ℃ for ethyl acetate oxidation, and 285 ℃ for toluene oxidation. Such a good catalytic performance of 5Fe/OMS-2 was associated with its high(Mn^(3+) + Mn^(2+)) content and adsorbed oxygen species concentration, and good lowtemperature reducibility and lattice oxygen mobility as well as strong interaction between Fe and OMS-2. In addition, catalytic mechanisms of the oxidation of three pollutants over the 5Fe/OMS-2 catalyst were also studied. It was found that CO, ethyl acetate or toluene was first adsorbed, then the related intermediates were formed, and finally the formed intermediates were completely converted into CO_(2) and H_(2)O.
The Fe-modi fied sepiolite-supported Mn–Cu mixed oxide(Cux Mny/Fe-Sep) catalysts were prepared using the co-precipitation method.These materials were characterized by means of the XRD,N_2 adsorption–desorption,XPS,H_2-TPR,and O_2-TPD techniques,and their catalytic activities for CO and ethyl acetate oxidation were evaluated.The results show that catalytic activities of the Cux Mny/Fe-Sep samples were higher than those of the Cu1/Fe-Sep and Mn2/Fe-Sep samples,and the Mn/Cu molar ratio had a distinct in fluence on catalytic activity of the sample.Among the Cux Mny/Fe-Sep and Cu1Mn2/Sep samples,Cu1Mn2/Fe-Sep performed the best for CO and ethyl acetate oxidation,showing the highest reaction rate and the lowest T50 and T90 of 4.4×10^(-6) mmol·g-1·s-1,110,and 140 °C for CO oxidation,and 1.9×10^(-6) mmol·g-1·s-1,170,and210 °C for ethyl acetate oxidation,respectively.Moreover,the Cu1Mn2/Fe-Sep sample possessed the best lowtemperature reducibility and the lowest temperature of oxygen desorption as well as the highest surface Mn^(4+)/Mn^(3+) and Cu^(2+)/CuO atomic ratios.It is concluded that factors,such as the strong interaction between the Cu or Mn and the Fe-Sep support,good low-temperature reducibility,and good mobility of chemisorbed oxygen species,might account for the excellent catalytic activity of Cu1Mn2/Fe-Sep.
Lisha LiuYong SongZhidan FuQing YeShuiyuan ChengTianfang KangHongxing Dai
Au-supported 13X-type zeolite(Au/13X)was synthesized using a common deposition-precipitation(DP)method with a solution of sodium carbonate as a precipitate agent.Further testing was conducted to test for catalytic oxidation of CO.A study was conducted on the effects of different preparation conditions(i.e.,chloroauric acid concentration,solution temperature,pH of solution,and calcinations temperature)on Au/13X for CO oxidation.In respect to the catalytic activity,the relationship between different the preparation conditions and gold particles in 13X zeolite was analyzed using X-ray diffraction,TEM and XPS.The activity of Au/13X catalysts in CO oxidation was dependent on the chloroauric acid concentration.From XRD results,a higher chloroauric acid concentration induced larger gold nanoparticles,which resulted in lower catalytic activity.Results revealed that higher temperatures induced higher Au loading,homogeneous deposit,and smaller gold clusters on the support of 13X,resulting in higher CO activity.Furthermore,a pH of 5 or 6 generated greater amounts of Au loading and smaller Au particles on 13X than at a pH of 8 or 9.This may be a result of an effective exchange between Au(OH)_(2)Cl_(2)^(-)and Au(OH)_(3)Cl^(-)on specific surface sites of zeolite under the pH’s 5 and 6.The sample calcined at 300℃showed the highest activity,which may be due to the sample’s calcined at 200℃inability to decompose completely to metallic gold while the sample calcined at 400℃had larger particles of gold deposited on the support.It can be concluded from this study that Au/13X prepared from a gold solution with an initial chloroauric acid solution concentration of 1.5×10^(-3)mol·L^(-1)gold solution pH of 6,solution temperature of around 90℃,and a calcination temperature of 300℃provides optimum catalytic activity for CO oxidation.
