For the better use of composites and a deeper insight into the fracture propa- gation and stress transfer of the interface between fiber and matrix, a theoretical solution of closed form is presented with the assumed bilinear local bond-slip law and a parabolic shear stress distribution along the thickness of the matrix. The load-displacement re- lationship and interfacial shear stress are obtained for four loading stages. Finally, the effects of Young＇s modulus of fiber （matrix） and bond length on the performance of the interface are illustrated.
The paper studies the problem of fluid flow and fluid shear stress in canaliculi when the osteon is subject to external mechanical loading and blood pressure oscillation.The single osteon is modeled as a saturated poroelastic cylinder. Solid skeleton is regarded as a poroelastic transversely isotropic material. To get near-realistic results, both the interstitial fluid and the solid matrix are regarded as compressible. Blood pressure oscillation in the Haverian canal is considered. Using the poroelasticity theory, an analytical solution of the pore fluid pressure is obtained. Assuming the fluid in canaliculi is incompressible, analytical solutions of fluid flow velocity and fluid shear stress with the Navier-Stokes equations of incompressible fluid are obtained. The effect of various parameters on the fluid flow velocity and fluid shear stress is studied.
A macro-micro analytical approach for the anti-penetrating contact problem at the interfaces of the delamination in symmetrically cross-plied,fiber-reinforced rectangular laminates is presented in this paper.The laminate is simply supported and subjected to a uniform transverse load with a through-width delamination buried at the center position.A contact factor is defined to characterize the contact effect and determined using the micro-mechanics of composite material.By analyzing the kinematics of nonlinear deformation at the interfaces of the delamination,the contact force is derived.Asymptotic solutions from perturbation analysis are presented.It is found that the deformation of the laminate involves a global deflection and a local buckling.The antipenetrating contact effects are characterized by the local buckling and are intrinsic properties of the laminates,relying only on the geometries of the delamination and the material properties.Parametric analyses show that the location and size of the contact areas and the distribution of the contact force are hardly affected by the aspect ratio.
