As the typical systems of nano structures, nanotubes can be widely applied in mechanical electronics, mechanical manufacture and other fields at nano scales. The superior dynamical properties of nanotubes have become a hot topic. Furthermore, there are always complicated conditions for practical engineering (e.g. initial stress/strain, temperature change for external environment and the interaction between the structure and elastic matrix). Then, it is important to establish the proper model and apply the effective analysis method. By using the nonlocal continuum method, this paper reviews the recent progress of dynamical properties of micro structures at nano scales. The discussion is focused on dynamical behaviors of nanotubes, including vibration, wave propagation and fluid-structure interaction, etc. At last, conclusions and prospects in future studies are discussed.
The transient wave propagation in the finite rectangular Mindlin plate is investi- gated by the analytical and experimental methods. The generalized ray method （GRM） which has been successfully applied to study the transient responses of beams, planar trusses, space frames and infinite layered media is extended to investigate the transient wave propagation and early short time transient response in finite Mindlin plate. Combining the wave solution, the shock source and the boundary conditions, the ray groups transmitted in the finite rectangular plate can be determined. Numerical simulations and experiments are performed and compared with each other. The results show that the transient wave propagation and early short time transient responses in the finite plate can be studied using the GRM. The early short time transient acceler- ations are very large for the finite plate subjected to the unit impulse, while the early short time transient displacements are very small. The early short time transient accelerations under the unit impulse are much larger than those under the unit step impulse. The thickness and material characteristics have remarkable effects on the early short time transient responses.
Band gap materials(i.e.phononic crystals) are the artificially periodic structures,which have the stop band characteristic for elastic waves.The elastic waves will be localized in phononic crystals with defects,which results in the energy being accumulated around the defects.As a result,it is important to analyze the wave propagation and localization in band gap materials,especially for the structures consisting of smart materials.For example,with the mechanical-electro and mechanical-electro-magneto coupling,the phononic crystals consisting of piezoelectric and magnetoelectroelastic materials can be applied widely.This sets the theoretical basis for the design of band gap materials with multi fields coupling.This paper reviews the recent development of the elastic wave propagation and localization in both ordered and disordered band gap materials.The discussion focuses on the stop band and localization characteristics of elastic waves.Analytical methods and important results are also presented.Finally,some problems for further studies are discussed.This work aims to present the basic properties of wave band gaps in phononic crystals and wave localization in disordered periodic structures(e.g.phononic crystals with definite and random defects and phononic quasicrystals).
This paper analyzes the physical meaning of the active and reactive power flow in the finite L-shaped beams and studies the active vibration control of the structures based on the active and reactive power flow.The traveling wave approach is used to calculate the structural dynamic responses.Because the error of control force is inevitable in practical applications,the effects of the error of control force on the control results are studied.The study indicates that the error of control force has pronounced influence on the control results of the acceleration and reactive power flow.It is obvious that the reactive power flow can represent the vibration strength component of the complex intensity,and the active power flow strongly depends on the structural damping of the finite beams.
In this paper,wave and vibratory power transmission in a finite L-shaped Mindlin plate with two simply supported opposite edges are investigated using the wave approach.The dynamic responses,active and reactive power flow in the finite plate are calculated by the Mindlin plate theory （MPT） and classic plate theory （CPT）.To satisfy the boundary conditions and continuous conditions at the coupled junction of the finite L-shaped plate,the near-field and far-field waves are entirely contained in the wave approach.The in-plane longitudinal and shear waves are also considered.The results indicate that the vibratory power flow based on the MPT is different from that based on the CPT not only at high frequencies but also at low and medium frequencies.The influence of the plate thickness on the vibrational power flow is investigated.From the results it is seen that the shear and rotary inertia correction of the MPT can influence the active and reactive power at the junction of the L-shaped plate not only at high frequencies but also at low and medium frequencies.Furthermore,the effects of structural damping on the active and reactive power flow at the junction are also analyzed.
Chun-Chuan Liu Feng-Ming Li Ting-Wei Liang Wen-Hu Huang
