The effect of processing parameters on the flow response and microstructural evolution of the a+b titanium alloy Ti-6.5Al-3.5Mo-1.5Zr-0.3Si has been studied by conducting isothermal hot compressive tests at a strain rate of 0.01-10 s-1 at 860-1100°C. The true stress-true strain curves of the sample hot-compressed in the a+b phase region exhibit a peak stress followed by continuous flow softening, whereas in the b region, the flow stress attains a steady-state regime. At a strain rate of 10 s-1, the alloy exhibits plastic flow insta-bilities. According to the kinetic rate equation, the apparent activation energies are estimated to be about 674-705 kJ/mol in the a+b region and 308-335 kJ/mol in the b region, respectively. When deformed in the a+b region, the globularization process of the a colony structure occurs, and a dynamic recrystallized microstructures are observed to show bimodal. Dynamic recrystallization can take place in the b region irrespective of starting deformed structures.
The characteristics of hot deformation of an α+β titanium alloy Ti-6.5Al-3.5Mo-1.5Zr-0.3Si with acicular microstructure were studied using isothermal hot compressive tests in a strain rate range of 0.01-10 s-1 at 860-1 100 °C. The true stress-true strain curves of alloy hot-compressed in the α+β region exhibit a peak stress followed by continuous flow softening; whereas in the β region,the flow stress attains a steady-state regime. At a strain rate of 10 s-1 and in a wide temperature range,the alloy exhibits plastic flow instability. According to the kinetic rate equation,the apparent activation energies are estimated to be about 633 kJ/mol in the α+β region and 281 kJ/mol in the β region,respectively. The processing maps show a domain of the globularization process of α colony structure and α dynamic recrystallization in the temperature range of 860-960 °C with a peak efficiency of about 60%,and a domain of β dynamic recrystallization in the β region with a peak efficiency of 80%.
