In this paper, five factors, namely the HF (hydrofluoric acid) concentration, field strength, illumination intensity as well as the oxidizing-power and conductivity of electrolytes were found to strongly affect the fast pore etching. The oxidizing power of aqueous HF electrolyte of different concentrations was especially measured and analysed. A positive correlation between optimal bias and HF concentration was generally observed and the relationship was semiquantitatively interpreted. Pore density notably increased with enhanced HF-concentration or bias even on patterned substrates where 2D (two-dimensional) nuclei were densely pre-textured. The etch rate can reach 400 μm/h and the aspect ratio of pores can be readily driven up to 250.
