A method was presented to prepare aluminide coatings on metals by combining the pack aluminizing with the ball impact process. This technique applied mechanical vibration to a retort, which was loaded with pack-aluminizing powder, specimens and alloy balls. Pack aluminizing was carried out with repeated ball impact, which accelerated chemical reactions and atomic diffusion. Aluminide coatings were formed at a relatively lower temperature (below 600 ℃) and in a shorter treatment time, compared with the conventional pack aluminizing. The effects of the operation temperature and the treatment time on the formation of the coatings were analysed. The SEM, EDS and XRD analysis results show that the aluminide coatings appear to be homogeneous, with a high density and free of porosity, and have excellent adherence to the substrate. The coatings mainly consist of Al-rich phases such as η-Fe2Al5, θ-FeAl3 and ?CrAl5. Oxidation resistance was studied by high-temperature tests. The formation mechanism of the Al-coatings was also investigated. This technique provides a new approach for industrial diffusion coatings with great energy and time savings.
Al2O3-Y2O3 nano- and micro-composite coatings were deposited on Fe-9Cr-Mo substrates by using sol-gel composite coating technology. The processing includes dipping samples in a sol-gel solution dispersed with fine ceramic powders, which are prepared by high-energy ball milling. High-resolution microscopy （FE-SEM） analyses show that the coating is composed of composite particle clusters with an average diameter of 1μm, and the coating is relatively dense without cracking during drying and sintering stages. XRD analyses show that the oxide coating is mainly composed of α-Al2O3 and γ-Al2O3. The oxidation tests performed at 600 ℃ in air show that the coatings are provided with much improved resistance against high temperature oxidation and scale spallation. It is indicated that nano-structured composite particles and reactive elements are integrated into the coatings, which plays an important role in preventing agglomeration of nano-particles and initiation of cracks.
