The magnetic microstructures of 2：17 type Sm （Co, Fe, Cu, Zr）z magnets were detected by magnetic force microscopy. Comparing the microstructures of the specimens eoated with and without Ta thin film before and after heat-treatment, it is found that： （a） as a protection layer, Ta coating layer about 20 nm thick can effectively restrain Sm volatilization under high temperature; （b） the stress built in the 2.17 type Sm-Co magnets during specimen preparation only affects some local parts of the domain structures; （c） the magnetic microstructures vary largely for specimens heat-treated at high temperature without Ta film coating due to Sm volatilization. In addition, by comparing with high coercivity Fe-Pt point tips, it is found that the Co-Cr thin-film tips are not suitable for detecting the magnetic microstructures of strong permanent magnets.
The typical magnetic domains of Sm（CObalFe0.25Cuo.07Zr0.02）7.4 magnets quenched through various heattreatment steps have been revealed by using magnetic force microscopy （MFM）. For the specimens in which the nominal c-axis is perpendicular to the imaging plane, the domain configurations change from plate-like for the as-sintered magnet to corrugation and spike-like for the homogenized one, and then to a coarse and finally to a finer domain structure when isothermally aged at 830℃ and then annealed at 400℃. However, only plate-like domains can be detected on the surfaces with the nominal c-axis parallel to the imaging plane. The finer domain （so-called interaction domain） is a characteristic magnetic domain pattern of the SmCo 2：IT-type magnets with high coercivities. Domain walls in a zigzag shape are revealed by means of MFM in final bulk SraCo 2：17-type sintered magnets.
Magnetic FePt nanodot arrays are promising candidates for making quantum magnetic recording disk. Here we introduce a hybrid method of FePt nanodot array fabrication through nanosphere lithography. This method combines the advantages of both top-down and bottom-up approaches and does not re- quire expensive equipment nor complicated processing steps.The size of magnetic FePt nanodots prepared can be as small as 40 nm.
wu PeiWenFANG YiKunTUO XinLinWANG XiaoGongHAN BaoShanYUAN Jun
