Low-voltage silicon （Si）-based light-emitting diode （LED） is designed based on the former research of LED in Si-based standard complementary metal oxide semiconductor （CMOS） technology. The low-voltage LED is designed under the research of cross-finger structure LEDs and sophisticated structure enhanced LEDs for high efficiency and stable light source of monolithic chip integration. The device size of low-voltage LED is 45.85x38.4 （#m）, threshold voltage is 2.2 V in common condition, and temperature is 27 ~C. The external quantum efficiency is about 10-6 at stable operating state of 5 V and 177 mA.
A new BPSK demodulator was presented.By using a clock multiplier with very simple circuit structure to replace the analog multiplier in the traditional BPSK demodulator,the circuit structure of the demodulator became simpler and hence its power consumption became lower.Simpler structure and lower power will make the designed demodulator more suitable for use in an internal single chip design for a wireless implantable neural recording system.The proposed BPSK demodulator was implemented by Global Foundries 0.35μm CMOS technology with a 3.3 V power supply.The designed chip area is only 0.07 mm;and the power consumption is 0.5 mW.The test results show that it can work correctly.
Face-centered orthorhombic（FCO） sampling can be implemented more easily on CMOS image sensors than on other video acquisition devices.The sampling efficiency of FCO is the highest among all threedimensional（3D） sampling schemes.However,interpolation of FCO-sampled data is inevitable in bridging human perception and machine-vision algorithms.In this letter,the concept of motion compensation is borrowed from deinterlacing,which displays interlaced videos on progressively scanned devices.The combination of motion estimation based on intrafield interpolated frames and motion-compensated interfield interpolation is found to provide the best performance by evaluating different combinations of motion estimation and interpolation.
In this paper, a silicon-based neural probe with microfluidic channels was developed and evaluated. The probe can deliver chemicals or drugs to the target neurons while simultaneously recording the electrical action of these neurons extracellularly. The probe was fabricated by double-sided deep reactive ion etching （DRIE） from a silicon-on-insulator （SO1） wafer. The flu- idic channels were formed with V-shape groove etching on the silicon probe and sealed with silicon nitride and parylene-C. The shank of the probe is 4 mm long and 120 ~tm wide. The thickness of the probe is 100 ~tm. The probe has two fluidic chan- nels and two recording sites. The microfluidic channels can withstand a pressure drop as much as 30 kPa and the flow resisti ity of the microfluidic channel is 0.13 μL min-1 kPa-1, The typical impedance of the neural electrode is 32.3 kΩ at 1 kHz at room temperature.
GUO Kai PEI WeiHua LI XiaoQian GUI Qiang TANG RongYu LIU Jian CHEN HongDa
