A servo press is a new type of mechanical press that is driven by programmable motors and offers superior performance such as low noise,excellent efficiency and high precision for metal forming operations. Similar to multi-link mechanical presses,a servo mechanical press tends to grow in size as the tonnage increases that calls for larger,heavy duty servo motors,which could be expensive and may not even be available. In this paper,a new concept of servo mechanical press with redundant actuation is proposed firstly using two servo motors driving one input shaft,i.e. one-point-two-motor mode that makes it possible to produce a larger press with available servomotors. Then the punching mechanism design is detailed. The performance indices are set up including mechanical advantage reciprocal and link force ratios. A bounded feasible solution space is constructed for dimensional synthesis based on non-dimensional link lengths and assembly conditions. The performance atlases are depicted over the bounded feasible solution space that lead to a visual solution of the punching mechanism with global optimization. Finally,case studies are given to illustrate the design method with visual global optimization,and a prototype with 200 t punching force is being developed in our laboratory to demonstrate efficacy of the new concept for servo mechanical press. The presented research provides a feasible solution to the development of heavy-duty servo mechanical presses and finds potential applications in the development of other types of heavy equipments with electric drive.
