Polypropylene(PP)/ethylene-octene copolymer(POE) blends were prepared with a twin-screw extruder.Their dynamic mechanical behavior were systematically investigated.The results show that PP/POE blends are heterogeneities with a partial compatible two-phase structure,the glass transition temperature of PP phases in the blends tends to shift towards high temperature with increasing the POE content,and the glass transition temperature of POE phases shifts towards the low temperature with increasing the PP content.The Kerner's dispersed phase model and co-continuous phase model can reasonably predict the visco-elasticity of PP/POE blends with different compositions.Additionally,the morphological structure of the blends can be estimated via comparing the predicted DMA behavior with the experimental data.
Finite element method is used to simulate the high-speed melt spinning process,based on the equation system proposed by Doufas et al.Calculation predicts a neck-like deformation,as well as the related profiles of velocity,diameter, temperature,chain orientation,and crystallinity in the fiber spinning process.Considering combined effects on the process such as flow-induced crystallization,viscoelasticity,filament cooling,air drag,inertia,surface tension and gravity,the simulated material flow behaviors are consistent with those observed for semi-crystalline polymers under various spinning conditions.The structure change of polymer coils in the necking region described by the evolution of conformation tensor is also investigated.Based on the relaxation mechanism of macromolecules in flow field different types of morphology change of polymer chains before and in the neck are proposed,giving a complete prospect of structure evolution and crystallization of semi-crystalline polymer in the high speed fiber spinning process.
The fractionated crystallization behavior of the minor dispersed HDPE phase in PS/POE/HDPE/SBS quaternary blends was investigated by differential scanning calorimetry (DSC).Interestingly,we found that the fractionated crystallization behavior of HDPE was molecular weight dependent.At a fixed composition,HDPE with lower molecular weight showed more obvious fractionated crystallization behavior than HDPE with higher molecular weight.This was ascribed to a finer dispersion of HDPE with lower molecular weigh...
