您的位置: 专家智库 > >

国家教育部博士点基金(20130092120039)

作品数:5 被引量:25H指数:3
相关作者:费庆国吴邵庆马睿姜东韩晓林更多>>
相关机构:东南大学更多>>
发文基金:国家教育部博士点基金国家自然科学基金教育部“新世纪优秀人才支持计划”更多>>
相关领域:航空宇航科学技术理学一般工业技术更多>>

文献类型

  • 5篇中文期刊文章

领域

  • 2篇航空宇航科学...
  • 2篇理学
  • 1篇一般工业技术

主题

  • 1篇动力学
  • 1篇圆柱
  • 1篇圆柱壳
  • 1篇载荷识别
  • 1篇寿命评价
  • 1篇随机风
  • 1篇太阳翼
  • 1篇屈曲
  • 1篇屈曲分析
  • 1篇热防护
  • 1篇热防护结构
  • 1篇柱壳
  • 1篇温度依赖
  • 1篇温度依赖性
  • 1篇模型修正
  • 1篇均匀化
  • 1篇均匀化方法
  • 1篇后屈曲
  • 1篇后屈曲分析
  • 1篇加筋圆柱壳

机构

  • 3篇东南大学

作者

  • 2篇费庆国
  • 2篇吴邵庆
  • 1篇谭福颖
  • 1篇董萼良
  • 1篇韩晓林
  • 1篇姜东
  • 1篇马睿
  • 1篇乔玲

传媒

  • 2篇Theore...
  • 1篇宇航学报
  • 1篇固体火箭技术
  • 1篇中国科技论文

年份

  • 1篇2018
  • 1篇2015
  • 3篇2014
5 条 记 录,以下是 1-5
排序方式:
考虑重力影响的太阳翼模型修正方法研究被引量:11
2014年
太阳翼结构地面模态试验时重力导致的几何非线性不能忽略,因此提出了一种考虑重力影响的柔性结构动力学模型修正方法。首先推导了地面环境下结构的切线刚度矩阵,求解广义特征值,得到重力影响下的模态,对试验和计算得到的模态振型进行匹配,并进行参数的灵敏度分析,选取合适的修正参数并迭代求解参数的修正量。以展开锁定情况下的太阳翼组合结构为研究对象,对比研究发现重力对模态频率有影响,采用分步修正策略,依次对单翼板弹性参数和翼板间连接刚度进行修正,研究结果表明本文方法不仅收敛速度较快,且具有较高的精度。
马睿姜东吴邵庆韩晓林费庆国
关键词:太阳翼动力学模型修正
Temperature-dependence of acoustic fatigue life for thermal protection structures被引量:3
2014年
Acoustic fatigue life evaluation is essential for thermal protection structures due to the severe thermo-acoustic load in service. A study on temperaturedependence of acoustic fatigue life for a C/SiC panel is presented in this paper.Effects of temperature on both the structural responses and the S–N curves are investigated. The Dirlik method is adopted to predict the fatigue life of a C/SiC panel at three different temperatures respectively. Significant differences are observed from the results of numerical simulations between the fatigue lives of the panel in the three cases. The temperature-dependence of acoustic fatigue life of a C/SiC panel is verified, and fatigue test of the material needs to be more attentively performed.
Yadong ZhouShaoqing WuZhiyong TanQingguo Fei
关键词:温度依赖性SIC纤维热防护结构寿命评价
薄壁加筋圆柱壳后屈曲分析方法研究被引量:5
2015年
基于有限元采用非线性显式动力学分析方法,开展了轴压作用下薄壁加筋圆柱壳结构的后屈曲行为研究,比较了加筋圆柱壳结构筋条截面高宽比、蒙皮厚度、加筋疏密程度等结构几何参数对显式非线性算法计算屈曲临界载荷与隐式非线性算法计算结果的差异。研究结果表明,结构筋条质量与蒙皮质量之比大于0.4时,显式计算结果与隐式计算结果趋于一致,当筋条质量与蒙皮质量之比小于0.4时,显式算法计算结果与隐式算法计算结果会产生波动性差异。显式非线性分析能快速高效分析筋条质量与蒙皮质量之比大于0.4的薄壁加筋圆柱壳结构后屈曲行为。
李庆亚谭福颖乔玲董萼良费庆国
关键词:加筋圆柱壳后屈曲
基于K-L展开的高耸结构上分布随机风载荷识别被引量:3
2018年
针对结构上分布式风载荷难以直接测量的问题,给出了一种利用位移响应,基于模态空间转换和Karhunen-Loéve(K-L)展开的分布风荷载间接识别方法。采用Davenport谱模拟风荷载的随机特征,计算高耸结构在有限测点处的动位移响应作为风荷载识别的"实测"输入。将风荷载的分布函数利用结构模态振型函数展开,从而将包含无限个时间历程的分布动荷载识别问题转换为多参数的动荷载识别问题。通过"实测"动响应样本集的K-L展开识别风荷载的分布特征以及统计特性。以一桅杆结构为对象开展数值仿真,验证了所提出识别方法的有效性。
朱茳吴邵庆
关键词:DAVENPORT谱
Numerical-experimental method for elastic parameters identification of a composite panel被引量:3
2014年
A hybrid numerical-experimental approach to identify elastic modulus of a textile composite panel using vibration test data is proposed and investigated. Homogenization method is adopted to predict the initial values of elastic parameters of the composite, and parameter identification is transformed to an optimization problem in which the objective function is the minimization of the discrepancies between the experimental and numerical modal data. Case study is conducted employing a woven fabric reinforced composite panel. Three parameters(E11, E22, G12) with higher sensitivities are selected to be identified. It is shown that the elastic parameters can be accurately identified from experimental modal data.
Dong JiangRui MaShaoqing WuQingguo Fei
关键词:参数识别复合板复合材料板均匀化方法
共1页<1>
聚类工具0