Structural collapse under blast loads is a very complex process. For several decades, the engineering profession has considered some approaches to analyze the essential physics of collapse phenomena. Recently, the interest in this topic has risen to an apex since the collapse of the World Trade Center towers. A two-step analysis approach to capture the characteristics of structural collapse during explosions is proposed. A numerical example is presented to illustrate the performance of the presented approach.
It is urgently needed to describe the structural collapse process under extreme conditions to survive people.For reinforced concrete structures it is still a difficulty to describe the failure of reinforced concrete members under complex internal force combination,such as under axial forces,bending moment,shear forces, and torsion working together.In this paper,based on the traditional Nielsen model,a new unified failure model on reinforcement evenly distributed concrete members with box section under combined forces is introduced.The advantages of the proposed new model are to consider the dowel actions of reinforcements and reasonably to consider of the shear carrying capacity of concrete,especially when compression stress of concrete is in a high value.Finally,the theoretical results of the new model are compared with a series of experimental results of box section members.The comparison has verified that the new model is more accurate and feasible for the design and calculation of box section members.
Based on the traditional Nielsen model,a unified failure model on the uniformly reinforced concrete box section members under combined forces was introduced by Luo and Liu.One of their contributions is adjustment of the shear carrying capacity of concrete at the member failure surface.In the unified failure model,the comparison with the experimental results verified this adjustment.Nevertheless,it should be pointed out that the adjustment factor of shear carrying capacity at member failure surface for the reinforced concrete members in the unified failure model is a fixed adjustment constant for all experiment data,which is basically determined by curve fitting.However,the adjustment factor should vary with the normal stress at the member failure surface.In this paper,an advanced theoretical model is introduced,in which the adjustment factor of shear carrying capacity at failure surface is a variable related to the normal stress at failure surface.Furthermore,the advanced unified failure model on the uniformly reinforced concrete box section member can still be expressed in a simple form.Finally,the comparison with several groups of test data has verified that this advanced model is more accurate and feasible to be used in design.
