Neutral beam injector for EAST is designed to deliver deuterium beams with a powerof 2 MW to 4 MW at an energy of 50 keV to 80 keV into the plasma with a beam dimension of12 cm × 48 cm.Considering the beam generation and transmission,a columniform beam-lineof Φ 250 cm × 400 cm is designed with a neutralizer,ion dump,calorimeter,bending magnetand cryopanels.The arrangement of the internal elements for the beam-line is reported.Arectangular sleeve coupled to the ion source is employed as the neutralizer.At the downstream ofthe neutralizer,a dipole magnet separates the residual ions from the beam passage with a reflectionradius of 42 cm for the full energy particles.The calorimeter and the ion dump serve as high heatflux components,which will work as thermal inertia targets in the first phase of operation.
For the remote control of a neutral beam injection (NBI) system, a software NBIcsw is developed to work on the control server. It can meet the requirements of data transmission and operation-control between the NBI measurement and control layer (MCL) and the remote monitoring layer (RML). The NBIcsw runs on a Linux system, developed with client/server (C/S) mode and multithreading technology. It is shown through application that the software is with good efficiency.
Beam angular divergence is one of the indicators to evaluate the beam quality. Operating parameters of the beam extraction system could be adjusted to gain better beam quality following the measurement results, which will be helpful not only to study the transmission characteristics of the beam and the power distribution on the heat load components, but also to understand the real-time working condition of the ion source and beam extraction system. This study includes: (1) the theoretical analysis of beam extraction pulse duration for measurement of beam angular divergence; (2) the theoretical analysis of beam intensity distribution during beam transmission for Experimental Advanced Superconducting Tokomak (EAST) neutral beam injector. Those theoretical analyses could point the way to the measurement of beam divergence angle for EAST neutral beam injector.
