Two types of 5μm thick hybrid orientation structure wafers,which were integrated by（110）or（100） orientation silicon wafers as the substrate,have been investigated for 15-40 V voltage ICs and MEMS sensor applications.They have been obtained mainly by SOI wafer bonding and a non-selective epitaxy technique,and have been presented in China for the first time.The thickness of BOX SiO2 buried in wafer is 220 nm.It has been found that the quality of hybrid orientation structure with（100）wafer substrate is better than that with（110）wafer substrate by＂Sirtl defect etching of HOSW＂.
A high-performance PMOSFET based on silicon material of hybrid orientation is obtained.Hybrid orientation wafers,integrated by（100） and（110） crystal orientation,are fabricated using silicon-silicon bonding, chemical mechanical polishing,etching silicon and non-selective expitaxy.A PMOSFET with W/L = 50μm/8μm is also processed,and the measured results show that the drain-source current and peak mobility of the PMOSFET are enhanced by up to 50.7%and 150%at V_（gs） =-15 V and V_（ds） =-0.5 V,respectively.The mobility values are higher than that reported in the literature.
