您的位置: 专家智库 > >

国家高技术研究发展计划(2006AA05Z203)

作品数:8 被引量:67H指数:6
相关作者:淮秀兰蔡军王唯威李勋锋梁世强更多>>
相关机构:中国科学院中国科学院研究生院更多>>
发文基金:国家自然科学基金国家高技术研究发展计划更多>>
相关领域:动力工程及工程热物理理学交通运输工程一般工业技术更多>>

文献类型

  • 8篇中文期刊文章

领域

  • 5篇动力工程及工...
  • 3篇理学
  • 1篇交通运输工程
  • 1篇一般工业技术

主题

  • 2篇多孔介质
  • 2篇水力空化
  • 1篇导热
  • 1篇动力学
  • 1篇动力学方程
  • 1篇动力学模拟
  • 1篇动力学特性
  • 1篇动力学行为
  • 1篇形核
  • 1篇液体饱和蒸气...
  • 1篇有效导热系数
  • 1篇噪声
  • 1篇蒸气压
  • 1篇数值模拟
  • 1篇数值模拟分析
  • 1篇湍流
  • 1篇气泡动力学
  • 1篇热系数
  • 1篇小波
  • 1篇小波分析

机构

  • 6篇中国科学院
  • 1篇中国科学院研...

作者

  • 6篇淮秀兰
  • 3篇蔡军
  • 2篇李勋锋
  • 2篇王唯威
  • 2篇梁世强
  • 1篇尹铁男
  • 1篇李虹霞
  • 1篇邹玉

传媒

  • 5篇工程热物理学...
  • 2篇Journa...
  • 1篇科学通报

年份

  • 2篇2010
  • 3篇2009
  • 1篇2008
  • 2篇2007
8 条 记 录,以下是 1-8
排序方式:
分形多孔介质中流体流动的LBM模拟被引量:6
2007年
基于分形理论构造了规则Sierpinski地毯结构来模拟多孔介质孔隙结构,采用Lattice Boltzmann Method(LBM)分别对不同孔隙率与进出口压差下的分形多孔介质中的流体流动进行了数值模拟。结果表明,分形多孔介质的某些流场结构也具有分形特征;体积流量和流场进出口压差呈线性关系,符合Darcy定律;流体穿过分形多孔介质的体积流量与孔隙率成指数函数关系.
王唯威淮秀兰蔡军
关键词:多孔介质LATTICEBOLTZMANNMETHOD
湍流作用下可压缩液体中空化泡的动力学特性被引量:14
2010年
以水为工作介质,在综合考虑了液体黏性、表面张力、液体压缩性以及湍流作用等因素的情况下,对孔板水力空化反应器中空化泡动力学行为特性进行了详细数值研究.详细分析了湍流作用、空化泡初始半径、孔板下游恢复压力、管道直径以及孔板直径与管道直径之比对空化泡运动特性及其所形成的压力脉冲的影响规律,发现了一些新现象,如空化泡半径二次生长现象.研究结果可为水力空化反应器的优化设计以及水力空化技术的实际应用提供一定的理论指导与技术支撑。
蔡军淮秀兰李勋锋
关键词:空化泡气泡动力学水力空化湍流
Experimental Research on Antiscale and Scale Removal by Ultrasonic Cavitation被引量:9
2009年
Aiming at the scale problem in heat-transfer equipments, experimental investigation on antiscale and scale removalby ultrasonic cavitation is performed. By means of microscopic magnifying photography system, thesedimentary phenomenon can be observed. The experimental research reveals the influencing rule of acoustic intensity,cavitational distance, liquid temperature and solution concentration. The experimental results indicate thatliquid temperature has different effects on antiscale and scale removal. Different experimental liquids are used forantiscale and scale removal experiments. The results show that every liquid has a respective Cavitational activetemperature. When ultrasonic is used for antiscale, the smaller acoustic intensity is, the better effect is. But, whenultrasonic is used for scale removal, acoustic intensity has a reverse influence. In addition, biggish solution concentrationis propitious to antiscale for long-time running. Distance of test sample to ultrasonic transducer alsohas certain influence on antiscale and scale removal. The smaller the distance to ultrasonic transducer is, the bettereffects antiscale and scale removal have.
LI Hong-xia,HUAI Xiu-lan,CAI Jun and LIANG Shi-qiangInstitute of Engineering Thermophysics,Chinese Academy of Sciences,Beijing,100190,China Professor
关键词:超声技术噪声锅炉
水力空化防除垢实验研究被引量:11
2010年
针对换热设备积垢与能源浪费问题,建立了水力空化防除垢实验测试平台,并以加热器和铜片试件为结垢表面进行了实验研究。采用显微放大摄影系统详细观测了水力空化防除垢现象与效果,系统研究了液体流量对防垢效果及积垢沉积的影响规律。研究结果表明:水力空化作用能使溶液中的成垢物质细化、破碎,减小垢层与试件表面的附着力并且将已有垢层粉碎、破坏;存在最佳的溶液流量使试件表面的防垢率达到最大,而积垢脱除速率随着流量的增大而降低。
李虹霞淮秀兰李勋锋蔡军
关键词:水力空化防垢除垢
分形多孔介质导热数值模拟分析被引量:21
2007年
本文基于分形理论构造了不同类型的分形结构来模拟多孔介质,采用有限容积法对其导热问题进行了数值模拟计算,详细分析了基质导热系数、孔隙流体导热系数、孔隙率等因素对其有效导热系数的影响规律。结果发现有效导热系数与基质导热系数、孔隙流体导热系数大致分别成幂函数关系,有效导热系数与孔隙率大致成指数函数关系。并把数值模拟分析结果与文献中的经验公式进行了对比分析,为其提供了数值验证。
王唯威淮秀兰
关键词:多孔介质有效导热系数分形
爆发沸腾形核分子动力学模拟被引量:1
2009年
采用分子动力学模拟方法研究了液氮和水爆发沸腾中均相形核能量转换过程,通过计算系统势能变化分析了热流量和高能分子团尺寸对形核过程能量转换的影响,并分析了水和液氮爆发沸腾形核区别。结果表明,热流量与高能分子团半径的增加都会使系统中的势能转化增加。在模拟后期,水的势能转化趋于平稳,液氮势能转化逐渐升高,这与液氮与水分子之间的相互作用有关。
邹玉淮秀兰梁世强
关键词:分子动力学模拟
超急速爆发沸腾的傅立叶与小波分析
2008年
采用快速瞬态微型压力测量系统对脉冲激光加热下无水乙醇超急速爆发沸腾过程中液池内压力变化进行了测量,利用傅立叶变换、小波分析等理论工具对该过程的能量与频率特性进行了分析,并对汽泡群行为进行了理论推测。结果发现,爆发沸腾过程中压力信号频率处于MHz量级;在不同阶段气泡群行为具有不同特点。
尹铁男淮秀兰闫润生梁世强
关键词:小波分析
Dynamic behaviors of cavitation bubble for the steady cavitating flow被引量:9
2009年
In this paper, by introducing the flow velocity item into the classical Rayleigh-Plesset dynamic equation, a newequation, which does not involve the time term and can describe the motion of cavitation bubble in the steadycavitating flow, has been obtained. By solving the new motion equation using Runge-Kutta fourth order methodwith adaptive step size control, the dynamic behaviors of cavitation bubble driven by the varying pressure fielddownstream of a venturi cavitation reactor are numerically simulated. The effects of liquid temperature (correspondingto the saturated vapor pressure of liquid), cavitation number and inlet pressure of venturi on radial motionof bubble and pressure pulse due to the radial motion are analyzed and discussed in detail. Some dynamicbehaviors of bubble different from those in previous papers are displayed. In addition, the internal relationshipbetween bubble dynamics and process intensification is also discussed. The simulation results reported in thiswork reveal the variation laws of cavitation intensity with the flow conditions of liquid, and will lay a foundationfor the practical application of hydrodynamic cavitation technology.
Jun CAI,Xiulan HUAI and Xunfeng LIInstitute of Engineering Thermophysics,Chinese Academy of Sciences,P.O.Box 2706,Beijing 100190,China Professor
关键词:动力学行为空泡流空化数液体饱和蒸气压动力学方程
共1页<1>
聚类工具0