您的位置: 专家智库 > >

国家自然科学基金(50975009)

作品数:4 被引量:23H指数:2
相关作者:李继婷王爽王举郑若隐刘磊更多>>
相关机构:北京航空航天大学更多>>
发文基金:国家自然科学基金更多>>
相关领域:自动化与计算机技术生物学更多>>

文献类型

  • 4篇中文期刊文章

领域

  • 4篇自动化与计算...
  • 1篇生物学

主题

  • 3篇康复
  • 2篇康复机器人
  • 2篇机器人
  • 2篇骨骼
  • 1篇虚拟手
  • 1篇虚拟现实
  • 1篇卒中
  • 1篇外骨骼
  • 1篇限额设计
  • 1篇脑卒中
  • 1篇康复训练
  • 1篇骨骼系统
  • 1篇关节
  • 1篇关节角
  • 1篇关节角度
  • 1篇钢丝绳
  • 1篇REHABI...
  • 1篇ROM
  • 1篇传动
  • 1篇传动系

机构

  • 3篇北京航空航天...

作者

  • 3篇李继婷
  • 1篇刘磊
  • 1篇郑若隐
  • 1篇王举
  • 1篇王爽

传媒

  • 1篇中国康复医学...
  • 1篇机器人
  • 1篇计算机与现代...
  • 1篇Chines...

年份

  • 1篇2014
  • 1篇2013
  • 1篇2012
  • 1篇2011
4 条 记 录,以下是 1-4
排序方式:
手康复机器人钢丝绳–绳套传动系统中的摩擦补偿被引量:8
2014年
在手康复机器人的钢丝绳–绳套传动系统中,钢丝绳与绳套之间的摩擦力会引起力控制过程中的动力损失,产生传动死区、滞后等现象,并且带来系统不稳定等问题,因此需要补偿摩擦力.首先推导了手指任意姿态下,钢丝绳中张力的计算公式.然后,1个手指关节上的传动模式简化如下:电动机1以位置控制模式运转,模拟关节运动;电动机2以转矩控制模式运转,补偿钢丝绳上的摩擦力.每根钢丝绳穿过绳套,绳端固定在电动机1和电动机2的输出轮上,钢丝绳两端张力之差即是摩擦力.将摩擦力转化为补偿电动机轴的等效摩擦力矩,补偿电动机以转矩控制模式运转,输出与等效摩擦力矩方向相反的转矩.假设时间间隔足够小、手指运动缓慢,利用t-1时刻的张力计算得到t时刻的等效摩擦力矩.用此迭代方法计算出不同时刻补偿电动机需要输出的补偿力矩,对钢丝绳–绳套中的摩擦力进行补偿.最后在实验平台上进行了主动康复模式实验,实验结果表明,补偿后的阻力只有补偿前的15%,该补偿方法有效.
王启申李继婷
Development of a Hand Exoskeleton System for Index Finger Rehabilitation被引量:12
2012年
In order to overcome the drawbacks of traditional rehabilitation method,the robot-aided rehabilitation has been widely investigated for the recent years.And the hand rehabilitation robot,as one of the hot research fields,remains many challenging issues to be investigated.This paper presents a new hand exoskeleton system with some novel characteristics.Firstly,both active and passive rehabilitative motions are realized.Secondly,the device is elaborately designed and brings advantages in many aspects.For example,joint motion is accomplished by a parallelogram mechanism and high level motion control is therefore made very simple without the need of complicated kinematics.The adjustable joint limit design ensures that the actual joint angles don't exceed the joint range of motion(ROM) and thus the patient safety is guaranteed.This design can fit to the different patients with different joint ROM as well as to the dynamically changing ROM for individual patient.The device can also accommodate to some extent variety of hand sizes.Thirdly,the proposed control strategy simultaneously realizes the position control and force control with the motor driver which only works in force control mode.Meanwhile,the system resistance compensation is preliminary realized and the resisting force is effectively reduced.Some experiments were conducted to verify the proposed system.Experimentally collected data show that the achieved ROM is close to that of a healthy hand and the range of phalange length(ROPL) covers the size of a typical hand,satisfying the size need of regular hand rehabilitation.In order to evaluate the performance when it works as a haptic device in active mode,the equivalent moment of inertia(MOI) of the device was calculated.The results prove that the device has low inertia which is critical in order to obtain good backdrivability.The experiments also show that in the active mode the virtual interactive force is successfully feedback to the finger and the resistance is reduced by one-third;for the passive control m
LI JitingWANG ShuangWANG JuZHENG RuoyinZHANG YuruCHEN Zhongyuan
关键词:骨骼系统限额设计关节角度ROM
一种外骨骼式人手康复机器人的设计被引量:2
2011年
手是人体最重要的结构之一。手不仅能完成许多粗大工作,而且还能从事与日常生活密切联系的各种精细活动。然而,许多意外事故和疾病,如外伤、脑卒中等可能会导致人手的感觉和运动功能丧失:患者需要进行康复训练来恢复人手的功能.
郑若隐李继婷王爽王举
关键词:康复机器人骨骼康复训练脑卒中
虚拟手的姿态控制与变形仿真被引量:1
2013年
iHandRehab应用机器人技术与虚拟现实技术对手部损伤患者进行康复训练。主动模式下的训练任务需要在虚拟环境中模拟人手抓持和释放物体的真实过程,难点集中在虚拟手与刚性物体接触时的姿态控制和局部变形计算。根据人手的组织结构和运动特征将食指和拇指简化为3指节串联机构,通过改变各关节的旋转角度来实现虚拟手的自由运动。虚拟抓持过程中以手指的运动学模型为基础,结合前后指节需要满足的约束关系确定虚拟手的最终姿态。指节和物体分别采用点壳和距离场模型进行碰撞检测,根据点壳上碰撞点的嵌入信息计算虚拟手在接触区域的局部变形量。实验结果表明:模型能够实时准确地模拟人手抓持刚性物体时的真实状态。
刘磊李继婷
关键词:虚拟现实
共1页<1>
聚类工具0