This paper presents an overview of the recent progress of potential theory method in the analysis of mixed boundary value problems mainly stemming from three-dimensional crack or contact problems of multi-field coupled media. This method was used to derive a series of exact three dimensional solutions which should be of great theoretical significance because most of them usually cannot be derived by other methods such as the transform method and the trial-and-error method. Further, many solutions are obtained in terms of elementary functions that enable us to treat more complicated problems easily. It is pointed out here that the method is usually only applicable to media characterizing transverse isotropy, from which, however, the results for the isotropic case can be readily obtained.
Two-dimensional thermoelasticity analysis of functionally graded thick beams is presented using the state space method coupled with the technique of differential quadrature. Material properties vary continuously and smoothly through the beam thickness, leading to variable coefficients in the state equation derived from the elasticity equations. Approximate laminate model is employed to translate the state equation into the one with constant coefficients in each layer. To avoid numerical instability, joint coupling matrices are introduced according to the continuity conditions at interfaces in the approximate model. The differential quadrature procedure is applied to discretizing the beam in the axial direction to make easy the treatment of arbitrary end conditions. A simply-supported beam with exponentially varying material properties is considered to validate the present method. Numerical examples are performed to investigate the influences of relative parameters.
Lü Chaofeng1, CHEN Weiqiu1 & ZHONG Zheng2 1. Department of Civil Engineering, Zhejiang University, Hangzhou 310027, China
The time-dependent behavior of a simply-supported functionally graded beam bonded with piezoelectric sensors and actuators is studied using the state-space method. The creep behavior of bonding adhesives between piezoelectric layers and beam is characterized by a Kelvin-Voigt viscoelastic model, which is practical in a high temperature circumstance. Both the host elastic functionally graded beam and the piezoelectric layers are orthotropic and in a state of plane stress, with the former being inhomogeneous along the thickness direction. A laminate model is employed to approximate the host beam. Moreover, the coupling effect between the elastic deformation and electric field in piezoelectric layers is considered. Results indicate that the viscoelastic property of interfacial adhesives has a significant effect on the function of bonded actuators and sensors with time elapsing.
YAN Wei1 & CHEN Weiqiu1,2 1. Department of Civil Engineering, Zhejiang University, Hangzhou 310027, China
