The infrared transmission spectra of a 0.54-μm-thick Ge film and a 20-μm-thick Si film were experimentally measured. As the incident radiation was in the wavelength range from 1.5 μm to 10 μm, the Ge film demonstrated a strongly spectral coherence. However, thermal radiation of the Ge film was found to be spatially incoherent due to its extreme thinness. The Si film exhibited significantly spectral and spatial coherence. The results confirmed that thermal radiation of a monolayer film could be coherent spectrally and spatially if the film thickness was comparable with the wavelength. The optical characteristic matrix method was applied to calculate the transmission spectra of the Si and Ge film, and the results agreed well with the measurements. This method was further used to analyze two multilayer films composed of five low emissive layers. Their emissivities were found to be highly emissive at a certain zenith angle, and the emissive peak could be controlled by careful selection of film thickness.
The interfacial effects on flow and heat transfer on micro/nano scale are discussed in this paper. Dif- ferent from bulk cases where interfaces can be simply treated as a boundary, the interfacial effects are not limited to the interface on a microscale but could extend into a significant, even the whole domain of the flow and heat transfer field when the characteristic size of the domain is close to the mean free path (MFP) of the carriers inside an object. Most of microscale thermal phenomena result from interfa- cial interactions. Any changes in the interactions between the object and boundary particles, such as the force between fluid and solid wall particles, microstructure of interfaces, could affect thermal properties, flow and heat transfer characteristics and hence change thermal conductivity, velocity and temperature profiles, friction coefficient and thermal radiative properties, etc. The properties of nano- structure or flow and heat transfer features of fluid in micro/nanostructures not only depend on them- selves, but also on the interaction with the interface because the interface impact can go deep inside the flow. The same fluid, same channel geometry but different wall materials could have different flow and heat transport characteristics on microscale.
