The distribution function of the hyperbranched polymers formed from the self-condensing vinyl polymerization with unequal reactivities was derived and the differential equations for the second moments are established, based on the variable of the conversion of B* groups. The various average degrees of branching can be designed by suitable values of reactivities ratio (r) and the conversion of A group (x). In order to reach the maximum degree of branching at a specified x, r needed is dependant on the value of x. The higher the x, the less the r needed is for the maximum value of degree of branching. At the end of the reaction, the maximum degree of branching reaches 0.5 with r=2.59.
由聚丙二醇二缩水甘油醚和甘油通过质子转移聚合(proton transfer polymerization)一步法制备了端羟基的温敏性超支化聚醚.聚合产物的分子量(Mn)在1.76×104~2.43×104之间,玻璃化转变温度(Tg)在-31.5^-26.7℃之间,热分解温度(Td)在367~376℃之间.通过控制聚丙二醇二缩水甘油醚和甘油的投料比,实现了对温敏性超支化聚醚最低临界溶解温度(LCST)的调节,LCST可控制在28.3~39.6℃之间.
Degree of branching (DB) is a crucial structure parameter of hyperbranched polymers, which can be determined by 1H NMR, quantitative 13C NMR, degradative method, etc. However, for complicated hy-perbranched polymers, intricate structure and severe overlap of spectral signals hinder the determina-tion of DB using traditional methods. In this work, the architecture of complicated hyperbranched polymers has been elucidated with the help of 2D NMR techniques. Using such a method, overlapped NMR signals can be well separated into a two-dimensional space, and additional structural information is also available. Correspondingly, quantitative analysis for complicated systems can be realized. De-termination of DBs for three types of complicated hyperbranched polymers synthesized from step-polymerization, self-condensation vinyl polymerization and self-condensation ring-opening po-lymerization is shown as examples.
A novel hyperbranched poly(urethane-tetrazole)(HPUTZ) was synthesized via the "A2+BB2' " approach using hexadiisocyanate(HDI) and 3-(bis-(2-hydroxyethyl)) aminopropyltetrazole(HAPTZ).The molecular structure was characterized by FTIR and 1H NMR spectroscopy.The number average molecular weight was measured to be 1.05×104 g/mol with a polydispersity of 1.27 by GPC analysis.The HPUTZ was further cured by the semi-adduct(PEG-IPDI) from polyethylene glycol(PEG) reacting with isophorone diisocyanate(IPDI) to form the crosslinked HAPTZ-PU film in different ratio of HAPTZ to PEG-IPDI.The glass transition temperature of HAPTZ-PU increased from 44.9 to 56.4 ℃ as the HPUTZ content increased from 20% to 33% from the DSC analysis.The DMA results indicated that the HPUTZ-PU with 20% HPUTZ possessed the highest storage modulus and loss tangent.However,the storage modulus increased with the increasing of HPUTZ segment at higher temperature.The shape memory study showed that all the films presented the excellent shape memory function.Over 98% shape recovery could be obtained for the HAPTZ-PU with 20%-33% HAPTZ segment content within 60 s in the tension deformation test and within 40 s at 80 ℃ in the bend deformation test.
