您的位置: 专家智库 > >

国家自然科学基金(21076100)

作品数:27 被引量:127H指数:7
相关作者:宋丽娟秦玉才张晓彤段林海孙兆林更多>>
相关机构:辽宁石油化工大学中国石油大学(华东)中国石油抚顺石化公司更多>>
发文基金:国家自然科学基金辽宁省高校创新团队支持计划国家重点基础研究发展计划更多>>
相关领域:石油与天然气工程化学工程理学冶金工程更多>>

文献类型

  • 27篇期刊文章
  • 9篇会议论文

领域

  • 17篇理学
  • 14篇化学工程
  • 13篇石油与天然气...
  • 1篇冶金工程

主题

  • 9篇分子
  • 9篇分子筛
  • 8篇加氢
  • 7篇加氢脱硫
  • 7篇催化
  • 7篇催化剂
  • 6篇酸性
  • 6篇Y型分子筛
  • 4篇吸附脱硫
  • 3篇乙炔
  • 3篇乙炔氢氯化
  • 3篇乙炔氢氯化反...
  • 3篇乙烯
  • 3篇水热
  • 3篇氯化
  • 3篇氯化反应
  • 3篇氯乙烯
  • 3篇密度泛函
  • 3篇密度泛函理论
  • 3篇活性位

机构

  • 31篇辽宁石油化工...
  • 17篇中国石油大学...
  • 4篇中国石油天然...
  • 2篇北京化工大学
  • 2篇兰州大学
  • 2篇沈阳工业大学
  • 2篇中国石油大学
  • 2篇抚顺师范高等...
  • 2篇中国石油抚顺...
  • 1篇中国石油天然...
  • 1篇中国石油
  • 1篇化工研究院

作者

  • 21篇宋丽娟
  • 15篇秦玉才
  • 7篇张晓彤
  • 4篇孙兆林
  • 4篇段林海
  • 3篇施岩
  • 3篇万海
  • 3篇邵新超
  • 3篇于文广
  • 3篇董世伟
  • 3篇张磊
  • 2篇李怀雷
  • 2篇王红
  • 2篇范跃超
  • 2篇武玉叶
  • 2篇王海彦
  • 2篇莫周胜
  • 2篇姜恒
  • 2篇王源
  • 2篇高雄厚

传媒

  • 7篇石油化工高等...
  • 4篇石油炼制与化...
  • 4篇物理化学学报
  • 2篇China ...
  • 1篇高等学校化学...
  • 1篇化学与粘合
  • 1篇分子催化
  • 1篇应用化学
  • 1篇石油学报(石...
  • 1篇天然气化工—...
  • 1篇中国钨业
  • 1篇石油化工
  • 1篇吉林大学学报...
  • 1篇Journa...
  • 1篇第19届全国...

年份

  • 1篇2019
  • 4篇2018
  • 2篇2017
  • 4篇2016
  • 4篇2015
  • 6篇2014
  • 10篇2013
  • 5篇2012
27 条 记 录,以下是 1-10
排序方式:
烷基噻吩在MoS_2团簇上吸附行为的密度泛函理论研究被引量:3
2012年
运用密度泛函理论(DFT),采用Mo16S32团簇模型,在PW91/DNP水平上研究了噻吩(TP)及一系列烷基噻吩类硫化物如2-甲基噻吩(2-MT)、3-甲基噻吩(3-MT)、2,3-二甲基噻吩(2,3-DMT)、2,4-二甲基噻吩(2,4-DMT)、2,5-二甲基噻吩(2,5-DMT)及3,4-二甲基噻吩(3,4-DMT)等在加氢脱硫催化剂MoS2上的吸附行为.结果表明,在η1S吸附构型中,Mo16S32团簇对烷基噻吩吸附能力的顺序为2,5-DMT>2,4-DMT≈2,3-DMT>2-MT>3,4-DMT>3-MT>TP.通过键长、Mayer键级、Mulliken电荷分析可知,当噻吩环的2-或5-位不含甲基时,吸附能随硫原子电荷密度的增加而增大;2-或5-位含甲基时,甲基与团簇上相邻的Mo原子发生了弱的相互作用,使吸附能增大;虽然2,5-DMT的2-和5-位均含有甲基,但甲基离团簇上相邻的Mo较远,相互作用较小,吸附能较2,3-DMT和2,4-DMT增加的较少.文中还对各硫化物在MoS2催化剂上的加氢脱硫反应进行了讨论.
李怀雷李强丁勇张晓彤凌明利孙兆林宋丽娟
关键词:加氢脱硫密度泛函理论
L沸石的合成条件与反应性能研究被引量:4
2012年
采用水热合成法成功合成了L沸石分子筛。采用X射线衍射仪、红外光谱仪等对其结构进行了表征,并在固定床装置上评价了其芳构化、异构化性能。结果表明,在L沸石合成初始凝胶组成为:n(K2O)/n(Na2O)/n(Al2O3)/n(SiO2)/n(H2O)=5.4∶5.7∶1∶30∶500时,最佳合成条件为:晶化温度170℃,晶化时间24h,陈化温度25℃,陈化时间2h,pH为9~10;该条件下制备的L沸石结晶度更高、骨架结构完整,并且在反应温度为460℃时液体收率达60.5%,异戊烷选择性35%。
卢亚昆万海任创宋丽娟孙兆林
关键词:L沸石水热合成晶化异构化
Pd掺杂方式对Pt/KL分子筛正己烷芳构化及抗硫性能的影响被引量:5
2014年
以浸渍法和水热合成法向Pt/KL催化剂中掺杂金属Pd,对催化剂进行改性和表征,并在固定床微型反应装置上考察Pd掺杂方式对Pt/KL催化剂正己烷芳构化性能及抗硫性能的影响.结果表明:不同方式掺杂Pd对分子筛的晶体结构和孔径分布等影响较小,对催化剂表面酸碱性质的影响较大;浸渍法掺杂金属Pd较水热法更能提高Pt/KL催化剂的正己烷芳构化反应活性、芳烃选择性及抗硫性能.这是由于通过浸渍法制备催化剂Pt-Pd/KL中的Pd与Pt相互作用增强了催化剂的金属催化功能,使得其芳构化活性和抗硫性增强;通过水热法制备催化剂Pt/PdKL中的Pd增强了催化剂酸性,从而降低了催化剂芳构化活性和抗硫能力所致.
万海张小雨张若杰宋丽娟
关键词:芳构化
Adsorption Thermodynamics and Diffusion Kinetics of PX over Na Y Zeolite Synthesized by In-Situ Crystallization from Kaolin Microsphere被引量:5
2014年
Para-xylene was chosen as the probe molecule to study adsorption thermodynamics and diffusion kinetics on NaY zeolite and composite structured NaY zeolite synthesized by in-situ crystallization from kaolin microsphere(designated as Na Y/kaolin composites) separately, using a high precision intelligent gravimetric analyzer(IGA). The adsorption isotherms showed normal Langmuir type-Ⅰ behaviors. The increased adsorption heat with an increasing p-xylene coverage supported a mechanism of phase transition, diffusion and re-arrangement of p-xylene molecules during the adsorption process. The rearrangement seemed to be most pronounced at an adsorption loading of 2.13 and 2.29 mmol/g for Na Y zeolite and Na Y/kaolin composites respectively. Compared with Na Y zeolite, a 2—3 times higher in the diffusion coefficient of p-xylene was observed on Na Y/kaolin composites when the pressure was more than 50 Pa. Temperature-programmed desorption(TPD) of p-xylene on two samples from room temperature to 450 ℃ at a special loading has also been investigated by IGA. Results showed only single desorption peak appeared for Na Y zeolite, indicating that adsorption can only occur in the super-cage structure. Comparably, there were two different peaks for in-situ synthesized Na Y zeolite, corresponding to the two thermo desorption processes in both super-cage structure and the channels provided by kaolin, respectively.Key words:
Zhao HuaSong LijuanQin YucaiDuan LinhaiSun Zhaolin
关键词:THERMODYNAMICSNAYZEOLITEPARA-XYLENE
新型体相Ni-Mo-W型加氢催化剂的沉淀机理研究被引量:2
2015年
采用共沉淀法制备Ni-Mo-W型体相催化剂前躯体,通过干燥、成型、焙烧制得Ni-Mo-W型体相催化剂,采用X射线粉末衍射(XRD)、X射线光电子能谱(XPS)、扫描电镜(SEM)对催化剂进行表征,对硝酸镍溶液与钼酸铵、偏钨酸铵溶液共沉淀过程的机理进行了研究。结果表明,原料Ni(NO_3)_2·6H_2O,(NH_4)_(10)W_(12)O_(41)·xH_2O,(NH_4)_6Mo_7O·_4H_2O经沉淀剂氨水调节pH,在适当条件下完成沉淀过程,其沉淀物组成以(NH4)Ni_2Mo_2O_8(OH)·H_2O、Ni_4W_6O_(21)(OH)_2·4H_2O为主,经焙烧形成NiMoO_4、NiWO_4。溶液中的镍更容易与钨酸根离子结合,所以镍、钨会首先反应生成层状复合物的主体层板,钼酸根离子随后进入层中,与层板发生相互作用,最终生成体相Ni-Mo-W型催化剂前躯体。
施岩王海彦孙兆林宋丽娟
关键词:层状结构加氢脱硫
钨在化工领域中的应用现状和发展前景被引量:7
2012年
综述了钨在化工领域中的应用现状和发展前景,包括化工设备用特种钢材、缓蚀剂、催化剂、等方面。对钨在新能源中的应用发展前景进行了展望。由于钨催化剂广泛应用于石油化工和环境保护等领域并呈现倍数增长趋势,因此回收这些废催化剂中的钨及其他有价金属也势在必行。
姜恒
关键词:缓蚀剂钨催化剂烟气脱硝
Ultra-deep adsorptive removal of thiophenic sulfur compounds from FCC gasoline over the specific active sites of CeHY zeolite被引量:2
2019年
Adsorption desulfurization performance of Na Y,HY and Ce HY zeolites is evaluated in a miniature fixedbed flow by model gasoline containing with thiophene,tetrahydrothiophene,2-methylthiophene,benzothiophene or mixed sulfur compounds.The structural properties of adsorbents are characterized by XRD,N2-adsorption and XPS techniques.Adsorption desulfurization mechanisms of these sulfur compounds over the specific active sites of adsorbents as a major focus of this work,have been systematically investigated by using in situ FT-IR spectroscopy with single and double probing molecules.Desulfurization experimental results show that the Ce HY adsorbent exhibits superior adsorption sulfur capacity at breakthrough point of zero sulfur for ultra-deep removal of each thiophenic sulfur compound,especially in the capture of aromatic 2-methylthiophene(about ca.28.6 mgS/gadsorbent).The results of in situ FT-IR with single probing molecule demonstrate an important finding that high oligomerization ability of thiophene or 2-methylthiophene on the CeHY can promote the breakthrough adsorption sulfur capacity,mainly resulting from the synergy between Br?nsted acid sites and Ce(III)hydroxylated species active sites located in the supercages of Ce HY.Meanwhile,the result of in situ FT-IR with double probing molecules further reveals the essence of oligomerization reactions of thiophene and 2-methylthiophene molecules on those specific active sites.By contrast,the oligomerization reaction of benzothiophene molecules on the active sites of Ce HY cannot occur due to the restriction of cavity size of supercages,but they can be adsorbed on the Br?nsted acid sites via protonation,and on Ce(III)hydroxylated species and extra-framework aluminum hydroxyls species via direct"S-M"bonding interaction.As to the tetrahydrothiophene,adsorption mechanism is similar to that of benzothiophene,except in the absence of protonation.The paper can provide a new design idea of specific adsorption active sites in excellent desulfurization adsorbents for elevat
Yun ZuChang ZhangYucai QinXiaotong ZhangLi ZhangHonghai LiuXionghou GaoLijuan Song
CuO-SBA-15的表面酸性对燃料油吸附脱硫的影响(英文)被引量:17
2012年
固相研磨法是将不同量的活性组分掺入到介孔材料上的一种简单有效的方法.采用该法以焙烧脱模前后的SBA-15为载体分别制备了不同负载量的CuO-SBA-15吸附剂.利用X射线衍射(XRD)、N2物理吸附、傅里叶变换红外(FTIR)等方法表征了吸附剂的物理性质.通过原位红外技术考察了改性前后介孔材料表面羟基的变化.借助吡啶-原位傅里叶变换红外(py-FTIR)技术考察了吸附剂表面的酸类型及相对酸量.采用静态吸附实验评价了吸附剂对催化裂化(FCC)燃料油的吸附脱硫性能.结果表明:CuO是与SBA-15表面的Si―OH结合形成[Si-O-Cu-O-Si]交联从而达到分散的目的;以SBA-15介孔材料(APS)为载体能够有效抑制在焙烧过程中介孔材料表面羟基的缩合,且CuO负载量达到3mmo·lg-1时仍能够均匀分散在载体SBA-15上,而采用焙烧脱模的SBA-15(CS)为载体制备的CuO-SBA-15吸附剂却出现了活性组分团聚现象;吸附剂的酸性与脱硫性能均随着CuO的增加出现先增加后降低的趋势,当CuO负载量达到3mmo·lg-1时吸附剂具有最高的Lewis酸(L酸)酸量及最佳的脱硫性能;吸附剂的L酸酸量与其脱硫性能成正相关关系;另外吸附剂的L酸的形成是由于改性后Cu周围的电荷密度降低引起的.
邵新超段林海武玉叶秦玉才于文广王源李怀雷孙兆林宋丽娟
关键词:表面酸性吸附脱硫LEWIS酸
Synthesis of Macro-Mesostructured γ-Al_2O_3 with Large Pore Volume and High Surface Area by a Facile Secondary Reforming Method被引量:2
2014年
Through improving the aging process during synthesis of the support, γ-Al2O3 with large pore volume and high surface area was synthesized by a facile secondary reforming method. The synthesis parameters, such as the reaction temperature, the first aging temperature and the second aging temperature, were investigated. The textural properties of γ-Al2O3 were characterized by means of N2 adsorption-desorption isotherms, X-ray powder diffractometry(XRD), scanning electron microscopy(SEM), Fourier transform infrared(FTIR) spectroscopy and thermogravimetry(TG). The experimental results indicated that AACH and amorphous AlOOH were the precursors of alumina, which were formed via precipitation from solutions after reaction of aluminum sulphate with ammonium hydrogen carbonate. The precursor nanocrystallites grew and re-assembled during the secondary reforming process, which resulted in an increased pore size and pore volume and a decreased bulk density. The as-synthesized γ-Al2O3 materials featured meso/macroporosity, large pore volume(2.175 cm3/g), high surface area(237.8 m2/g), and low bulk density(0.284 g/mL).
Meng XiuhongDuan LinhaiXie XiaohuaWang QiangWang Haiyan
关键词:高表面积介观结构X射线粉末衍射
酸催化及竞争吸附对CeY分子筛吸附脱硫性能的影响(英文)被引量:15
2014年
采用液相离子交换(LPIE)法制备了CeY分子筛,并研究烯烃和芳烃对其吸附脱硫性能的影响.利用固定床穿透曲线技术研究吸附剂的脱硫性能,结果表明:烯烃和芳烃的存在均导致吸附剂吸附硫容量减少,然而,烯烃的影响明显强于芳烃.采用原位傅里叶变换红外(FTIR)光谱技术研究噻吩、环己烯和苯的吸附行为,结果发现:烯烃和芳烃降低吸附剂脱硫性能的实质分别为吸附剂表面酸性导致的酸催化反应和π-络合吸附的芳烃分子与硫化物分子的竞争吸附.另外,烯烃的影响取决于吸附剂的表面酸性,尤其是强B酸(Br?nsted酸)中心.这是由于B酸中心会导致烯烃和噻吩发生质子化反应,且质子化物种易于进一步发生低聚反应.生成的低聚物覆盖吸附活性中心导致吸附剂对其它噻吩分子的吸附能力降低.
秦玉才高雄厚段林海范跃超于文广张海涛宋丽娟
关键词:吸附脱硫质子化
共4页<1234>
聚类工具0