We theoretically investigate the wave–particle duality based on a Raman atom interferometer, via the interaction between the atom and Raman laser, which is similar to the optical Mach–Zehnder interferometer. The wave and which-way information are stored in the atomic internal states. For the φ- π- π /2 type of atom interferometer, we find that the visibility(V) and predictability(P) still satisfy the duality relation, P2+ V2≤ 1.
We present an innovative and practical scheme of building a miniaturized wavemeter, with the advantages of low cost, high reliability and simple structure. Through a calibration test by a 780 nm external cavity diode laser(ECDL), the results show that our system gets a wavelength resolution of better than 1 pm, measurement accuracy of better than 2 pm(corresponding to a frequency of 1 GHz), and a measurement range of 8.5 nm. Finally, the multi-mode comparison test between our system and a commercial spectrum analyzer further indicates the high-precision, miniaturization and low cost of the proposed system, which shows that it is particularly suitable for ECDL and atom cooling and trapping experiments. The system design, experimental results and conclusions are of definite significance as a fine reference for other ranges of wavelength.
We develop a simple and practical scheme to apply sideband cooling to a cloud of rubidium atoms. A sample containing 4 × 10^（70） ^（87）Rb is trapped in a far red detuned optical lattice. Through optimizing the relevant parameters, i.e., laser detuning, magnetic field, polarization, and duration time, a temperature around 1.5 μK and phase space density close to 1/500 are achieved. Compared with polarization gradient cooling, the temperature decreases by around one order of magnitude. This technique could be used in high precision measurement such as atomic clocks and atom interferometer. It could also serve as a precooling means before evaporation cooling in a dipole trap, and may be a promising method of achieving quantum degeneracy with purely optical means.
We present a compact and practical scheme of building a ~780 nm external cavity diode laser(ECDL) whose wavelength is mainly determined by an interference filter. The Lorentzian linewidth measured by the heterodyne beating between two identical lasers is 60 k Hz, and the geometry size of the laser is only 71.5 mm×65 mm×40 mm. The linear cavity design is less sensitive to misalignment induced by mechanical and thermal disturbances, and in comparison to a common grating-based design, the sensitivity to vibration is substantially reduced. Due to its excellent performance, the laser design has already been applied to cold atom trapping experiments. This interference filter ECDL method can also be extended to other wavelengths and widen the application range of diode laser.
