In order to examine the process of a rotary engine primary compressor impacted by bird, a finite element model of a bird impacted on plate is developed with the explicit code PAM-CRASH. The smooth particles hydrodynamic （SPH） method is used to simulate the bird because of the SPH method showing no signs of instability and correctly modeling the breaking-up of the bird into particles. Good agreement between the simulation results and experimental results indicates that the numerical method of bird strike used in the present paper is reasonable. Then a rotary engine primary compressor impacted by three different configurations bird named straight-ended cylinder bird, quadrangular bird, hemispherical-ended bird are investigated using the numerical simulation method. It is found that the whole process of bird strike sustained about 3.5 ms and the bird is slashed by blade during the strike. The geometry configuration of bird affected the displacement and von Mises stress of some blades severely, just because the breaking bird＇s mass is affected by the bird＇s configuration. In the event of bird striking on the site of＂up＂some blades may develop plastic deformation and it is very adverse for the safety work of the engine.
In order to examine the potential of using the coupled smooth particles hydrodynamic （SPH） and finite element （FE） method to predict the dynamic responses of aircraft structures in bird strike events, bird-strike tests on the sidewall structure of an aircraft nose are carried out and numerically simulated. The bird is modeled with SPH and described by the Murnaghan equation of state, while the structure is modeled with finite elements. A coupled SPH-FE method is developed to simulate the bird-strike tests and a numerical model is established using a commercial software PAM-CRASH. The bird model shows no signs of instability and correctly modeled the break-up of the bird into particles. Finally the dynamic response such as strains in the skin is simulated and compared with test results, and the simulated deformation and fracture process of the sidewall structure is compared with images recorded by a high speed camera. Good agreement between the simulation results and test data indicates that the coupled SPH-FE method can provide a very powerful tool in predicting the dynamic responses of aircraft structures in events of bird strike.
