In order to improve the multiplexing capability of the optical sensors based on the lower interferential optic fiber sensing technology and the white light fiber-optic Mach-Zehnder interferometer,reflective ladder topology network ( RLT) with tailored formula was proposed. The topology network consists of 6 rungs sensing elements linked by 5 couplers. Two cases with different choices of couplers were contrasted: one is equal coupling ratio,and the other is tailored coupling ratio. Through the simulation of these two cases,the detailed multiplexing capability was analyzed,and accordingly the experiments were also carried out. The simulation results showed that,the tailored formula enhances the multiplexing capability of the structure. In the first case, the maximum number of sensors which can be multiplexed is 8,and in the other case is 12 fiber optic sensors. The experimental results have a good agreement with numerical simulation results. Thus,it is considered expedient to incorporate RLT into large-scale building,grounds,bridges,dams,tunnels,highways and perimeter security.
A torsion sensor based on the near-helical(NH) long period fiber grating(LPFG) is fabricated by using a high frequency pulsed CO_2 laser. Each groove of the NH-LPFG is spirally written in the four sides of a single-mode fiber. The NH-LPFG has a helical periodic vertical index modulation. This is different from the screw-type index modulation of the common helical LPFGs(H-LPFGs) fabricated in a twisted fiber. The torsion and temperature characteristics of the NH-LPFG are experimentally investigated. The temperature sensitivity is about0.0668 nm/°C. The torsion sensitivity is 0.103 nm/(rad/m) and independent of the polarization state of incident light.
