To explore the application of the characteristics of metallic microparticles, alternating current electric trapping of the SU-8 microrods coated with a thin gold layer by the chemical approach is investigated. Positive dielectrophoresis is used to absorb the gold-coated SU-8 microrods at the edge of the parallel electrodes, thereby forming chains to connect the electrodes. This is a fast automatic microcircuit formation process. Moreover, a non-charged molecule is modified on the surface of the gold-coated SU-8 microrod, and the modified microrods are controlled by the alternating electric field to form a number of chains. The different chains between the parallel electrodes consist of various parallel circuits. In order to compare these chains with different electric surfaces, the impedances of the metallic and modified microrods are measured and compared, and the results show that the gold-coated microrods act as pure resistors, while the microrods functionalized by a non-charged molecule behave as good capacitors.
The electrorotation of microspheres coated with conductive surface is a novel and important technology for label-free biosensors. Using the electroless plating approach, the polystyrene microspheres with 15 μm and 25 μm in diameters were coated with 50 nm gold layer in thickness. The electrorotation experiments on those gold coated polystyrene microspheres (GCPMs) were carried out. The results showed that they rotated in the opposite direction of the electric field in a low frequency range (100-100 kHz), and the maximum rotation speed was higher than that of uncoated microspheres. Based on the theory of traveling wave electroosmosis(TWEO) and induced charge electroosmosis (ICEO), the electrorotation of GCPMs was quantitively analyzed and confirmed by observing the fluid flow around GCPM. The equations describing the electroration speed of GCPMs were proposed, which are consistent with the experiment results.
Microspheres coated with a perfectly conductive surface have many advantages in the applications of biosensors and micro-electromechanical systems.Polystyrene microspheres with the diameter of 10 μm were coated with a 50 nmthick gold layer using an electroless gold plating approach.Dielectrophoresis(DEP) for bare microspheres and shelled microspheres was theoretically analysed and the real part of the Clausius-Mossotti factor was calculated for the two kinds of microspheres.The experiments on the dielectrophoretic characterisation of the uncoated polystyrene microspheres and gold coated polystyrene microspheres(GCPMs) were carried out.Experimental results showed that the gold coated polystyrene microspheres were only acted by a positive dielectrophoretic force when the frequency was below 40M Hz,while the uncoated polystyrene microspheres were governed by a negative dielectrophoretic force in this frequency range.The gold coated polystyrene microspheres were exploited to form the microwire automatically according to their stable dielectrophoretic and electric characterisations.
