针对捷联惯性导航系统(INS,Inertial Navigation System)全温动态环境下测量误差问题,提出一种全温六方位正反速率标定及分段线性插值补偿方法.根据工作环境设定标定温度点,在每个恒温点设计六方位正反速率标定方案;采用分段线性插值算法实时补偿系统零偏和标度因数温度误差,提高了系统温度及动态环境下的测量精度.实验结果表明:采用该方法系统的车载和飞行实验纯惯性导航误差均值分别由1.501 n mile/h和5.811 n mile/h减小到0.393 n mile/h和0.681n mile/h,为进一步提高合成孔径雷达(SAR,Synthetic ApertureRadar)成像分辨率奠定基础.
Aimed at low accuracy of attitude determination because of using low-cost components which may result in non-linearity in integrated attitude determination systems, a novel attitude determination algorithm using vector observations and gyro measurements is presented. The various features of the unscented Kalman filter (UKF) and optimal-REQUEST (quaternion estimator) algorithms are introduced for attitude determination. An interlaced filtering method is presented for the attitude determination of nano-spacecraft by setting the quaternion as the attitude representation, using the UKF and optimal-REQUEST to estimate the gyro drifts and the quaternion, respectively. The optimal-REQUEST and UKF are not isolated from each other. When the optimal-REQUEST algorithm estimates the attitude quaternion, the gyro drifts are estimated by the UKF algorithm synchronously by using the estimated attitude quaternion. Furthermore, the speed of attitude determination is improved by setting the state dimension to three. Experimental results show that the presented method has higher performance in attitude determination compared to the UKF algorithm and the traditional interlaced filtering method and can estimate the gyro drifts quickly.
